Isola™ EDGE Filtered Workstation

Look and feel of a traditional hood -only with filtration

Isola™ EDGE Filtered Workstation

Isola™ EDGE

Click here to submit a quote request to our sales team.


Isola™ EDGE Filtered Chemical Workstation was designed and engineered to provide the end user with superior filtration while offering the same conveniences found on traditional laboratory hoods. The main chamber is dual-wall thermally-fused solid polypropylene allowing the installation of common laboratory fixtures and electrical outlets, if needed. The main chamber, made from structural polypropylene, offers superior chemical resistance while the contoured entry foil provides both spill containment and smooth airflow dynamics. The angled and rolled entry design of the Isola™ EDGE promotes a smooth, turbulent-free work area which reduces eddy currents that affect containment.

Isola™ Filtered Workstations

Isola™ Series Filtered Chemical Workstations are a series of ductless chemical enclosures that offer industry leading microprocessor controls, superior filtration capabilities combined with a variety of chamber construction materials to meet and exceed today's laboratory challenges. Since 1959, Mystaire® has engineered and developed filtration products that ensure operator safety while eliminating environment contamination and promoting a greener laboratory culture. The Isola™ filtered chemical workstation series are a direct result of the last fifty-plus years of industry experience, improved science and technology offerings and customer feedback. Isola™ filtered chemical workstations are a series of high efficiency products that provide protection to the end user and environment from hazardous chemical fumes and vapors generated during routine laboratory experimentation and manipulation. At the core of Isola™ are technologies that constantly monitor and maintain face velocity, monitor and notify filter saturation and monitor environmental conditions that affect lsola™'s performance. These core technologies are part of the EverSafe™ Ill TOUCH Control Advanced Microprocessor that offers simple and effective one-touch Icon control of all workstation functions. The heart of ISOLA™ filtered chemical workstation is the filtration matrix that provides for a three stage filtration process to effectively adsorb and capture a wide range of contaminates that includes gases, vapors and powders.

Isola™ EDGE Filtered Workstation with cart


  • EverSafe™ III TOUCH touch screen controller constantly monitors fume hood performance with audible and visible alarms
  • Vividly displayed status of face velocity in linear feet per minute or meters per second
  • 18-Icon display for simple touch control of hood features and functions
  • LED lighting for true illumination of the entire work area
  • Three-stage filtration to confirm to SEFA 9-2010 DHIII recommendations
  • Dual-wall, thermally-fused structural polypropylene construction
  • Variable airflow control with automatic airflow sensor calibration
  • Solid-state gas detection with three sensitivity set points
  • Conforms to UL, CSA and CE electrical requirements
  • Integral polypropylene spill basin with rolled foil entry
  • 110 or 220 V AC
  • Built-in filter and application validation
  • Optional installation of gas, water, electrical fixtures
  • Optional installation of polypropylene sink
  • Available in 36, 48 and 72 inch widths with a nominal depth of 28 inches

EverSafe™ III TOUCH advanced microprocessor controller

Isola™ EDGE Filtered Workstations are fitted with the EverSafe™ III TOUCH advanced microprocessor safety controller. EverSafe™ III TOUCH features a LCD display of face velocity to assure users they are working within OSHA requirements. Sophisticated controls determine chemical breakthrough based on the type of solvents used within the hood. Visual and audible alarms alert operators if the airflow is at an unsafe level or if filters are approaching saturation, allowing sufficient time to replace filters. EverSafe™ III TOUCH maintains fume hood face velocity by taking constant measurements at the opening and adjusting airflow to ensure compliance to user preset values.


Safety, in one word describes the benefits of ISOLA™ Series Filtered Chemical Workstations. The unique filtration matrix found in ISOLA™ allows it to perform above the SEFA 9-2010 DH III recommend practice guideline. The user's safety is constantly maintained. ISOLA™ filtered chemical workstations have real time built-in features that monitor and prevent unsafe conditions without requiring user interaction.

The ISOLA™ Series Filtered Chemical Workstation filtration matrix is comprised of three unique and separate zones that effectively adsorb and capture toxic gases and particulate. Between filtration Zones 2 and 3 Isola™ electronically monitors filter saturation level and alerts the end user if a high temperature or high humidity event is present thus ensuring operator safety.


  1. Laboratory room air enters into Isola™
  2. The contaminants are mixed with laboratory air
  3. Contaminated air is filtered through either gas phase carbon filtration or mechanical filtration
  4. Air is constantly monitored for filter breakthrough as well as temperature and humidity
  5. Air passes through the safety filtration zone before returning to the laboratory
Isola™ Air Flow


Internal Dimensions 30″ W x 36.5″ H x 24.5″ D 42″ W x 36.5″ H x 24.5″ D 66″ W x 36.5″ H x 24.5″ D
External Dimensions 36″ W x 51″ H x 28″ D 48″ W x 51″ H x 28″ D 72″ W x 51″ H x 28″ D


Heavy Duty Stand

Our white, epoxy-coated stands are engineered and designed to support the Isola™ Series Filtered Chemical Workstations. The stands are constructed of 1.5” tube stock 14-guage cold-rolled steel. They are designed to be flat packaged and assembled onsite by the end user. Each Isola™ Filtered Workstation is designed to be secured to the corresponding stand, once assembled, using the hardware that is supplied. Each Isola™ stand features a two-position movable base bar for wheelchair or laboratory chair compatibility. Standard height of 34 inches with the ability to adjust the leveling feet makes the Isola™ stand meet ADA requirements.

Heavy Duty Stand

Polypropylene Laboratory Sinks

Many laboratory applications require a sink within the work area for the disposal of liquids used in the approved application. Mystaire® offers a full line of polypropylene sinks that are ideal for this application and can be easily installed in the work surface of any Isola™ filtered chemical workstation. Constructed from polypropylene, the sinks are lightweight and chemical-resistant, making them ideal for most laboratory applications.

Polypropylene Laboratory Sinks


Laboratory fixtures, as found in most labs, can be added to any Isola™ EDGE Filtered Chemical Workstation. All fixtures are pre-installed, plumbed and tested on the workstations post with remote control knobs and simple end user terminal connection to origin supply lines. The supplied water and gas fixtures are color coded to meet current laboratory standards and guidelines. Isola™ fixtures can be remote control or direct control depending on the application and end user requirements. Mystaire® offers only the best quality fixtures from industry leading suppliers.